Drum Handling Equipment

Home | Contact us Here are your search results >>>

DT32 - Drum Transporter and Pouring Stand

For 210 litre steel drums - Capacity 350kg.

Welded steel construction.
Removable 2-position handle.
Wheels: 2X 400mm dia. 2X 160mm dia castors,
with solid rubber tyres.
4 nylon drum rollers and strap supplied.
L X w: 1250 X 780mm
Height of bung 440mm
Finish: Red epoxy
Weight: 48kg
DT32 - Drum Transporter and Pouring Stand

DT30/P - Drum Trolley and Pouring Stand

For 210 litre steel drums - Capacity 250kg.

Choose pneumatic or solid tyred wheels:
2 X 400mm dia
4 X Nylon drum rollers and strap supplied.
L X W X H: 1220 X 800 X 510
Height of bung 360mm
Finish: Blue epoxy
Weight: 22kg (Pneumatic - DT30P)
Weight: 35kg (Solid - DT30)
DT30/P - Drum Trolley and Pouring Stand

DT42 - Low Loading Drum Carrier

Capacity 250kg.

Fully welded construction.
2 X 200mm dia. Wheels with bright zinc plated steel centres, roller bearings and solid rubber tyres.
Castor: Swivel rear castor with 125mm dia. Bright zinc plated steal centred wheel, roller bearing and total stop brake fitted as standard.
L X W X H: 890 X 800 X 810
Underside of drum: 25mm. Ground clearance: 15mm
Finish: Red epoxy
Weight: 24kg
DT42 - Low Loading Drum Carrier

DT60 - Pallet Loading Drum Truck

Capacity 300kg.

Designed to assist loading and unloading 210 litre drums onto pallets or platforms etc With sliding drum retention clamp
2 X 250mm dia and 2 X 200mm dia. With roller bearings and solid rubber tyres
L X W X H: 1100 X 1660 X 610
Finish: Blue epoxy
Weight: 29kg
DT60 - Pallet Loading Drum Truck

DT80 - Three-in-one Drum Carrier

Capacity: steel drum 360kg; plastic drum 250kg

Simple lever action lifts drum for transportation, and further movement of lever allows drum to be rotated through 360°
Drum held securely in 200mm wide steel girdle harness with two ratchet clamps.
Height adjustment for easy loading of heavy drums.
Fitted with 2 X 250mm dia wheels and 1 X 160mm dia swivel, braked castor.All tyres, solid rubber.
L X W X H: 1030 X 895 X 1280
Finish: Red epoxy
Weight: 54kg
DT80 - Three-in-one Drum Carrier

DT50 - Drum Tilt Lever

Wide trim tubular handle.
Cross member with rim hook.
L X W: 1300 X 400
Finish: Blue epoxy
Weight: 6kg
DT50 - Drum Tilt Lever

DT51 - Up-Down Ender

For up-ending and down-ending steel drums.
L X W: 1725 X 250; O/A handle width 600mm
Finish: Blue epoxy
Weight: 8kg
DT51 - Up-Down Ender

DT20 - Drum Trucks

Capacity 300kg

Standard 2-wheel with rear bar support
Helps operator move and manoeuvre loaded truck.
Tubular and hollow section construction with centre beam adjustable drum retaining hook
2 X 250mm dia
Finish: Blue epoxy
Weight: 20kg
DT20 - Drum Trucks

DT24 - Drum Trucks

Capacity 300kg

Standard 4-wheel with rear swivel castors.
Helps operator move and manoeuvre loaded truck.
Tubular and hollow section construction with centre beam adjustable drum retaining hook
2 X 250mm dia, rear castors 2 X 125mm dia
Finish: Blue epoxy
Weight: 21kg
DT24 - Drum Trucks

DT25 - Drum Trucks

Capacity 300kg

Standard 4-wheel with rear swivel castors.
Helps operator move and manoeuvre loaded truck.
Tubular and hollow section construction with centre beam adjustable drum retaining hook
2 X 400mm dia, rear castors 2 X 160mm dia
Finish: Blue epoxy
Weight: 36kg
DT25 - Drum Trucks

DT27 - Drum Trucks

Capacity 300kg

Standard 4-wheel with rear swivel castors.
Helps operator move and manoeuvre loaded truck.
Tubular and hollow section construction with centre beam adjustable drum retaining hook
2 X 400mm dia, rear castors 2 X 160mm dia
Finish: Blue epoxy
Weight: 23kg
DT27 - Drum Trucks

DS17 - Drum Stands

Static stand DS17
Proven stand design with 3 wheel options.
Steel welded chassis finished in red epoxy.
Available with or without drum rotation rollers.
L X W X H: 880 X 585 X 490
Weight: 9kg
DS17 - Drum Stands

DS16 - Drum Stands

Mobile stand DS16
2 axles. Fixed nylon wheels 100 X 40mm
Proven stand design with 3 wheel options.
Steel welded chassis finished in red epoxy.
Available with or without drum rotation rollers.
L X W X H: 880 X 585 X 530
Weight: 11kg
DS16 - Drum Stands

DS15 - Drum Stands

Mobile stand DS15
2 Swivel, 2 fixed castors, 80mm nylon wheels.
Proven stand design with 3 wheel options.
Steel welded chassis finished in red epoxy.
Available with or without drum rotation rollers.
L X W X H: 880 X 585 X 560
Weight: 16kg
DS15 - Drum Stands

DS24 - Drum Stands

Mobile stand with drum rotation DS24
2 fixed outrigger wheels 150 X 40mm
2 fixed swivel castors nylon wheels 80 X 35mm
Proven stand design with 3 wheel options.
Steel welded chassis finished in red epoxy.
Available with or without drum rotation rollers.
L X W X H: 880 X 725 X 580
Weight: 15kg
DS24 - Drum Stands

DS19 - Drum Handling

Capacity 250kg

2 fixed outrigger wheels 150 X 40mm
2 swivel castors nylon wheels 80 X 35mm
Tilt lever and drum rotation rollers
O/A L X W X H: 880 X 725 X 580
Weight: 17kg
Finish: Red epoxy
DS19 - Drum Handling

DS07 - Drum Stands

Capacity 250kg

Stand only
Flat steel drum support cradles
Standard width 630mm
Fully welded construction
L X H: 880 X 500
Weight: 15kg
Finish: Red epoxy
DS07 - Drum Stands

DS08 - Drum Stands

Capacity 250kg

Mobile stand
Flat steel drum support cradles
Standard width 630mm
Fully welded construction
L X H: 880 X 580
Weight: 17kg
Finish: Red epoxy
DS08 - Drum Stands

DS09 - Drum Stands

Capacity 250kg

Mobile with tilt lever, Tilt lever length 1070mm
Flat steel drum support cradles
Standard width 630mm
Fully welded construction
L X H: 880 X 580
Weight: 21kg
Finish: Red epoxy
DS09 - Drum Stands

DT250 - Universal Drum Truck

Suitable for steel, plastic or fibre drums, welded construction flat and tube steel.
200mm dia. Wheels with roller bearings.
H X W: 1020 X 660
Weight: 15kg
Finish: Blue epoxy
DT250 - Universal Drum Truck

MDC5 - Manual Drum Tongs

Capacity 360kg

For lifting 210 Litre open top and tight head steel drums with L and XL rings.Welded gripping hooks.
Fitted with 20mm dia steel pin for attaching to overhead lifting gear or fork lift adaptor beam
Weight: 4kg
Finish: Orange epoxy
MDC5 - Manual Drum Tongs

MDC6 - Drum Pincer

Capacity 500kg

For lifting 210 Litre open top and tight head steel drums.
Fitted with 20mm steel pin for attaching to overhead lifting gear or fork lift adaptor beam
The jaw grips climb of drumb and the vertical bar keeps the drum steady. All steel construction
Weight: 12kg
Finish: Orange epoxy
MDC6 - Drum Pincer

MDC10 - Horizontal Drum Tongs

Capacity 500kg

For lifting 210 Litre open top and tight head steel drums, using overhead lifting gear or fork lift adaptor beam.
Weight: 3kg
Finish: Orange epoxy
MDC10 - Horizontal Drum Tongs

DT12 - 3 Wheeled Dolly

Capacity 270kg

Suitable for 130 or 210 litre drums.
O/A H X Dia: 120 X 800mm
Load height 55mm
3 X 80mm dia nylon swivel castors.
Weight: 8kg
Finish: Red epoxy
DT12 - 3 Wheeled Dolly

DT10 - Circular Drum Dolly

Capacity 300kg

Flat steel braces with 4 nylon wheels 80mm dia in swivel castor housings.
Flat steel circular retention ring 610mm internal dia
Weight: 9kg
Finish: Red epoxy
DT10 - Circular Drum Dolly

DT11 - 4 Wheel Drum Dolly

Capacity 500kg

Max drum dia 610mm
Immensely strong fabricated construction,4 nylon wheels in ball bearing swivel castors.
80mm wheel dia with thread guards.
Weight: 11kg
Finish: Red epoxy
DT11 - 4 Wheel Drum Dolly

MDC9 - Drum Tines

Fork truck attachment for transporting 210 litre open top and tight head drums in the horizontal position.
Drum tines fit over forks and are secured in position with "T" bar clamping screws
W X L X H: 605 X 1240 X 140
Fork pocket W X H: 170 X 50
Fork centres: 380mm
Weight: 36kg
Finish: Yellow or Orange epoxy
MDC9 - Drum Tines

MDC4 - Horizontal Drum Tongs

Capacity 500kg

For lifting 210 litre tight head steel drums, using overhead lifting gear or fork lift adaptor beam.
To operate, set locking lever in locked open position. When central over the horizontal drum, release locking lever to allow hooks to fall and locate under both rims. Hooks automatically engage as drum is lifted and automatically release when drum is set down.
Suitable for 210 litre steel drums 760-910mm long.
Plastic hand grip
Weight: 9kg
Finish: Yellow or Orange epoxy
MDC4 - Horizontal Drum Tongs

MDC310 - Adaptor Beam With Swivel Hook

Capacity 1000kg

Use your fork lift truck as a mobile crane. Adaptor beam fitted with forged steel shackle with a swivel hook. Suitable for use with drum handling attachments and other secure lifting duties.
Adaptor beam must be fitted at the load centre as specified by the fork lift truck manufacturer.
Fork pocket W X H: 135 X 50
Fork centres: 500mm
Weight: 16kg
Finish: Yellow or Orange epoxy
MDC310 - Adaptor Beam With Swivel Hook

MDC1 - 210 Litre Drum Clamp

Capacity 500kg

Lift 210 litre drums with rolling hoops with the drum clamp attachment. Clamp fits over forks and is secured with "T" bar clamping screws.
The two drum fingers have adjusting bolts complete with lock nuts fitted to the underside to enable the fingers to be adjusted parallel.
W X L X H: 580 X 840 X 110
Fork pocket W X H: 170 X 50
Fork centres: 380mm
Weight: 27kg
Finish: Yellow or Orange epoxy
MDC1 - 210 Litre Drum Clamp

MDC2 - 210 Litre Double Drum Clamp

Capacity 1000kg

Similar to single drum clamp, but can lift a single or two 210 litre steel drums with rolling hoops.
Clamp fits over forks of fork truck and is secured with "T" bar clamping screws.
W X L X H: 1220 X 1070 X 140
Fork pocket W X H: 170 X 50
Fork centres: 380mm
Weight: 48kg
Finish: Yellow or Orange epoxy
MDC2 - 210 Litre Double Drum Clamp

DT28 - High Drum Stand

Capacity 250kg

Ideal for use as a dispensing station.
80 mm dia hardwearing and oil resistant nylon wheels.
Finish: Blue epoxy
DT28 - High Drum Stand

DS100 - Stacking Drum Pallet Racking System

Flexible, expandible storage system for 200/220 litre steel drums
Holds 2 drums. Strong welded steel construction stackable pallet
O/A H X W X D: 890 X 1490 X 615
Fork pockets W X H: 240 X 70mm
Distance between pockets 430mm
Maximum width over forks 920mm
Maximum stacking 3 units high
Finish: Orange epoxy
DS100 - Stacking Drum Pallet Racking System

DS10 - Drum Pallet

Suitable for 210 litre steel drums.
Tubular welded construction for hard rugged use.
Sheet steel fork sleeves
Maximum load 1000kg
L X W: 1350 X 600
Weight: 16kg
Finish: Red epoxy
DS10 - Drum Pallet

<<<Back to Search

Stairclimbers (mobility) | Stairclimbers (handling) | Pallet Trucks & stackers | General Handling & access | Scissor Tables | Sack Trucks
Stackers & People Lifters Stainless Steel / Galvanized (Food IND) | Lifters | Work Positioners | Drum Handling Equipment | Fork Truck Driver Training

Site produced by Marc Simmons ©2002