Drum Handling, Transporter, Trolley, Loading from Manual Handling Solutions


MHS offer an extensive range of drum handling equipment. For more information on this range of products please contact us or call 01553 811977. Product Downloads - Drum Handling 5.26MB
Click to image enlarge
DT32 - Drum Transporter and Pouring Stand  [contact us] - For 210 litre steel drums - Capacity 350kg.
  • Welded steel construction.
  • Removable 2-position handle.
  • Wheels: 2X 400mm dia. 2X 160mm dia castors, with solid rubber tyres.
  • 4 nylon drum rollers and strap supplied.
  • L X w: 1250 X 780mm.
  • Height of bung 440mm.
  • Finish: Red epoxy.
  • Weight: 48kg.
Click to image enlarge
DT30/P - Drum Trolley and Pouring Stand  [contact us] - For 210 litre steel drums - Capacity 250kg.
  • Choose pneumatic or solid tyred wheels:
  • 2 X 400mm dia
  • 4 X Nylon drum rollers and strap supplied.
  • L X W X H: 1220 X 800 X 510
  • Height of bung 360mm
  • Finish: Blue epoxy
  • Weight: 22kg (Pneumatic - DT30P) /li>
  • Weight: 35kg (Solid - DT30)
Click to image enlarge

DT42 - Low Loading Drum Carrier  [contact us] - Capacity 250kg.

  • Fully welded construction.
  • 2 X 200mm dia. Wheels with bright zinc plated steel centres, roller bearings and solid rubber tyres.
  • Castor: Swivel rear castor with 125mm dia. Bright zinc plated steal centred wheel, roller bearing and total stop brake fitted as standard.
  • L X W X H: 890 X 800 X 810
  • Underside of drum: 25mm. Ground clearance: 15mm
  • Finish: Red epoxy
  • Weight: 24kg
Click to image enlarge

DT60 - Pallet Loading Drum Truck  [contact us] - Capacity 300kg.

  • Designed to assist loading and unloading 210 litre drums onto pallets or platforms etc with sliding drum retention clamp.
  • 2 X 250mm dia and 2 X 200mm dia. With roller bearings and solid rubber tyres.
  • L X W X H: 1100 X 1660 X 610
  • Finish: Blue epoxy
  • Weight: 29kg
Click to image enlarge

DT80 - Three-in-one Drum Carrier  [contact us]  - Capacity: steel drum 360kg; plastic drum 250kg

  • Simple lever action lifts drum for transportation, and further movement of lever allows drum to be rotated through 360°
  • Drum held securely in 200mm wide steel girdle harness with two ratchet clamps.
  • Height adjustment for easy loading of heavy drums.
  • Fitted with 2 X 250mm dia wheels and 1 X 160mm dia swivel, braked castor. All tyres, solid rubber.
  • L X W X H: 1030 X 895 X 1280
  • Finish: Red epoxy
  • Weight: 54kg
Click to image enlarge

DT50 - Drum Tilt Lever  [contact us]

  • Wide trim tubular handle.
  • Cross member with rim hook.
  • L X W: 1300 X 400
  • Finish: Blue epoxy
  • Weight: 6kg
 
Click to image enlarge

DT51 - Up-Down Ender  [contact us]

  • For up-ending and down-ending steel drums.
  • L X W: 1725 X 250; O/A handle width 600mm
  • Finish: Blue epoxy
  • Weight: 8kg
Click to image enlarge

DT20 - Drum Trucks  [contact us] - Capacity 300kg.

  • Standard 2-wheel with rear bar support
  • Helps operator move and manoeuvre loaded truck.
  • Tubular and hollow section construction with centre beam adjustable drum retaining hook
  • 2 X 250mm dia
  • Finish: Blue epoxy
  • Weight: 20kg
Click to image enlarge

DT24 - Drum Trucks  [contact us]  - Capacity 300kg.

  • Standard 4-wheel with rear swivel castors.
  • Helps operator move and manoeuvre loaded truck.
  • Tubular and hollow section construction with centre beam adjustable drum retaining hook
  • 2 X 250mm dia, rear castors 2 X 125mm dia
  • Finish: Blue epoxy
  • Weight: 21kg
Click to image enlarge

DT25 - Drum Trucks  [contact us]  - Capacity 300kg.

  • Standard 4-wheel with rear swivel castors.
  • Helps operator move and manoeuvre loaded truck.
  • Tubular and hollow section construction with centre beam adjustable drum retaining hook
  • 2 X 400mm dia, rear castors 2 X 160mm dia
  • Finish: Blue epoxy
  • Weight: 36kg
Click to image enlarge

DT27 - Drum Trucks  [contact us] - Capacity 300kg

  • Standard 4-wheel with rear swivel castors.
  • Helps operator move and manoeuvre loaded truck.
  • Tubular and hollow section construction with centre beam adjustable drum retaining hook
  • 2 X 400mm dia, rear castors 2 X 160mm dia
  • Finish: Blue epoxy
  • Weight: 23kg
Click to image enlarge

DS17 - Drum Stands  [contact us]

  • Static stand DS17
  • Proven stand design with 3 wheel options.
  • Steel welded chassis finished in red epoxy.
  • Available with or without drum rotation rollers.
  • L X W X H: 880 X 585 X 490
  • Weight: 9kg
 
Click to image enlarge

DS16 - Drum Stands  [contact us]

  • Mobile stand DS16
  • 2 axles. Fixed nylon wheels 100 X 40mm
  • Proven stand design with 3 wheel options.
  • Steel welded chassis finished in red epoxy.
  • Available with or without drum rotation rollers.
  • L X W X H: 880 X 585 X 530
  • Weight: 11kg
Click to image enlarge

DS15 - Drum Stands  [contact us]

  • Mobile stand DS15
  • 2 Swivel, 2 fixed castors, 80mm nylon wheels.
  • Proven stand design with 3 wheel options.
  • Steel welded chassis finished in red epoxy.
  • Available with or without drum rotation rollers.
  • L X W X H: 880 X 585 X 560
  • Weight: 16kg
 
Click to image enlarge

DS24 - Drum Stands  [contact us]

  • Mobile stand with drum rotation DS24
  • 2 fixed outrigger wheels 150 X 40mm
  • 2 fixed swivel castors nylon wheels 80 X 35mm
  • Proven stand design with 3 wheel options.
  • Steel welded chassis finished in red epoxy.
  • Available with or without drum rotation rollers.
  • L X W X H: 880 X 725 X 580
  • Weight: 15kg
Click to image enlarge

DS19 - Drum Handling  [contact us]  - Capacity 250kg.

  • 2 fixed outrigger wheels 150 X 40mm
  • 2 swivel castors nylon wheels 80 X 35mm
  • Tilt lever and drum rotation rollers
  • O/A L X W X H: 880 X 725 X 580
  • Weight: 17kg
  • Finish: Red epoxy
Click to image enlarge

DS07 - Drum Stands  [contact us]  - Capacity 250kg.

  • Stand only
  • Flat steel drum support cradles
  • Standard width 630mm
  • Fully welded construction
  • L X H: 880 X 500
  • Weight: 15kg
  • Finish: Red epoxy
Click to image enlarge

DS08 - Drum Stands  [contact us]  - Capacity 250kg.

  • Mobile stand
  • Flat steel drum support cradles
  • Standard width 630mm
  • Fully welded construction
  • L X H: 880 X 580
  • Weight: 17kg
  • Finish: Red epoxy
Click to image enlarge

DS09 - Drum Stands  [contact us]  - Capacity 250kg.

  • Mobile with tilt lever, Tilt lever length 1070mm
  • Flat steel drum support cradles
  • Standard width 630mm
  • Fully welded construction
  • L X H: 880 X 580
  • Weight: 21kg
  • Finish: Red epoxy
Click to image enlarge

DT250 - Universal Drum Truck [contact us]

  • Suitable for steel, plastic or fibre drums, welded construction flat and tube steel.
  • 200mm dia. Wheels with roller bearings.
  • H X W: 1020 X 660
  • Weight: 15kg
  • Finish: Blue epoxy
Click to image enlarge

MDC5 - Manual Drum Tongs [contact us]  - Capacity 360kg.

  • For lifting 210 Litre open top and tight head steel drums with L and XL rings. Welded gripping hooks.
  • Fitted with 20mm dia steel pin for attaching to overhead lifting gear or fork lift adaptor beam.
  • Weight: 4kg
  • Finish: Orange epoxy
Click to image enlarge

MDC6 - Drum Pincer [contact us]  - Capacity 500kg.

  • For lifting 210 Litre open top and tight head steel drums.
  • Fitted with 20mm steel pin for attaching to overhead lifting gear or fork lift adaptor beam.
  • The jaw grips climb of drum and the vertical bar keeps the drum steady. All steel construction.
  • Weight: 12kg
  • Finish: Orange epoxy
Click to image enlarge

MDC10 - Horizontal Drum Tongs [contact us]  - Capacity 500kg.

  • For lifting 210 Litre open top and tight head steel drums, using overhead lifting gear or fork lift adaptor beam.
  • Weight: 3kg
  • Finish: Orange epoxy
Click to image enlarge

DT12 - 3 Wheeled Dolly [contact us]  - Capacity 270kg.

  • Suitable for 130 or 210 litre drums.
  • O/A H X Dia: 120 X 800mm
  • Load height 55mm
  • 3 X 80mm dia nylon swivel castors.
  • Weight: 8kg
  • Finish: Red epoxy
 
Click to image enlarge

DT10 - Circular Drum Dolly [contact us]  - Capacity 300kg.

  • Flat steel braces with 4 nylon wheels 80mm dia in swivel castor housings.
  • Flat steel circular retention ring 610mm internal dia
  • Weight: 9kg
  • Finish: Red epoxy
Click to image enlarge

DT11 - 4 Wheel Drum Dolly [contact us]  - Capacity 500kg.

  • Max drum dia 610mm
  • Immensely strong fabricated construction, 4 nylon wheels in ball bearing swivel castors.
  • 80mm wheel dia with thread guards.
  • Weight: 11kg
  • Finish: Red epoxy
Click to image enlarge

DT11 - 4 Wheel Drum Dolly [contact us]  - Capacity 500kg.

  • Fork truck attachment for transporting 210 litre open top and tight head drums in the horizontal position.
  • Drum tines fit over forks and are secured in position with "T" bar clamping screws.
  • W X L X H: 605 X 1240 X 140
  • Fork pocket W X H: 170 X 50
  • Fork centres: 380mm
  • Weight: 36kg
  • Finish: Yellow or Orange epoxy
Click to image enlarge

MDC4 - Horizontal Drum Tongs [contact us]  - Capacity 500kg.

  • For lifting 210 litre tight head steel drums, using overhead lifting gear or fork lift adaptor beam.
  • To operate, set locking lever in locked open position. When central over the horizontal drum, release locking lever to allow hooks to fall and locate under both rims. Hooks automatically engage as drum is lifted and automatically release when drum is set down.
  • Suitable for 210 litre steel drums 760-910mm long.
  • Plastic hand grip
  • Weight: 9kg
  • Finish: Yellow or Orange epoxy
Click to image enlarge

MDC310 - Adaptor Beam With Swivel Hook  [contact us]  - Capacity 1000kg.

  • Use your fork lift truck as a mobile crane. Adaptor beam fitted with forged steel shackle with a swivel hook. Suitable for use with drum handling attachments and other secure lifting duties.
  • Adaptor beam must be fitted at the load centre as specified by the fork lift truck manufacturer.
  • Fork pocket W X H: 135 X 50
  • Fork centres: 500mm
  • Weight: 16kg
  • Finish: Yellow or Orange epoxy
 
Click to image enlarge

MDC1 - 210 Litre Drum Clamp [contact us]  - Capacity 500kg.

  • Lift 210 litre drums with rolling hoops with the drum clamp attachment. Clamp fits over forks and is secured with "T" bar clamping screws.
  • The two drum fingers have adjusting bolts complete with lock nuts fitted to the underside to enable the fingers to be adjusted parallel.
  • W X L X H: 580 X 840 X 110
  • Fork pocket W X H: 170 X 50
  • Fork centres: 380mm
  • Weight: 27kg
  • Finish: Yellow or Orange epoxy
Click to image enlarge

MDC2 - 210 Litre Double Drum Clamp [contact us]  - Capacity 1000kg.

  • Similar to single drum clamp, but can lift a single or two 210 litre steel drums with rolling hoops.
  • Clamp fits over forks of fork truck and is secured with "T" bar clamping screws.
  • W X L X H: 1220 X 1070 X 140
  • Fork pocket W X H: 170 X 50
  • Fork centres: 380mm
  • Weight: 48kg
  • Finish: Yellow or Orange epoxy
Click to image enlarge

DT28 - High Drum Stand [contact us]  - Capacity 250kg.

  • Ideal for use as a dispensing station.
  • 80 mm dia hardwearing and oil resistant nylon wheels.
  • Finish: Blue epoxy
Click to image enlarge

DS100 - Stacking Drum Pallet Racking System  [contact us]

  • Flexible, expandable storage system for 200/220 litre steel drums
  • Holds 2 drums. Strong welded steel construction stackable pallet
  • O/A H X W X D: 890 X 1490 X 615
  • Fork pockets W X H: 240 X 70mm
  • Distance between pockets 430mm
  • Maximum width over forks 920mm
  • Maximum stacking 3 units high
  • Finish: Orange epoxy
Click to image enlarge

DS10 - Drum Pallet  [contact us]

  • Suitable for 210 litre steel drums.
  • Tubular welded construction for hard rugged use.
  • Sheet steel fork sleeves
  • Maximum load 1000kg
  • L X W: 1350 X 600
  • Weight: 16kg
  • Finish: Red epoxy

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk