Mezzanine Floor Lifter - Sapa Components Goods Lift

Mezzanine Goods Floor Lift

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at

Product Downloads

MHS Solutions Range.pdf

Mezzanine Floor Lifter.pdf

Sapa Components Pressweld.pdf




Sapa Sapa Sapa Sapa Sapa) Sapa Sapa
Sapa Components (Pressweld) Ltd  
APPLICATION  Lifting goods
CONSTRUCTION  Single Scissor Table
MODEL / TYPE TLXY3-15/460-2C
CAPACITY 1500KG – evenly distributed load
PLATFORM SIZE 2500mm long & 1520mm wide, with smooth top plate
OPERATION   2.3 kW compact electro-motor with hydraulic pump unit and adequately sized oil tank wired to IP55 Standard Power unit is located outside the lift
POWER SUPPLY  400 Volts, 3 phase, 50 Hz
CONTROL VOLTAGE 24 Volts with IP55 insulated electrics
TRAVEL SPEED Approximately 75 seconds to maximum height
CYLINDERS Normally single acting precision made units complete with pipe break valve to prevent a rapid lowering speed in the unlikely event of a hydraulic hose failure
WEIGHT Approximately 1750KG’s
STANDARD FINISH Blue (RAL 5017) & Black (RAL 9005) – spray painted
Specific colour available at extra cost  
CONTROLS 2 x controls (located at ground and 1st floor levels) UP & DOWN latching hand control units with EMERGENCY STOP button and 4 meter long cable
HANDRAILS & GATES 1100mm high handrails to both long sides and 1 short side Single outward opening gate on other short side, electrically interlocked type 1
SAFETY TRIP BAR Aluminium safety frame with built in safety function. If the safety frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again.
MAINTENANCE Standard safety legs are provided to support the scissor lift mechanism in the raised position and must be deployed for all servicing and maintenance work

At ground and 1st floor levels, the table will be guarded to 1 long side by a partition wall. We will supply and fit guarding to the remaining 3 sides:

Ground level: 3 sided steel mesh enclosure measuring 2.9m x 1.9m x 3.9m (L x W x H)

1st floor level: 3 sided steel mesh enclosure measuring 2.9m x 1.9m x 1.1m (L x W x H)

Both levels there will be a single outwards opening gate to allow access.

Both gates will be fitted with Electrical & Mechanical interlocks to prevent the platform moving if the gate is not shut and prevent the gate from opening unless the platform is parked.

See more examples... 1 | 2 | 3 | 4 | 5 | 6 | 7| 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |

Mezzanine Floor Enquiry Form
Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at
Mezzanine Goods Floor Lift