Mezzanine Goods Floor Lifter, Manual Handling Solutions Goods Lift


Mezzanine Goods Floor Lift

The Manual Handling Solutions Mezz Lift is a robust and versatile platform lift for handling all sorts of loads up to approx 750kg safely and efficiently between floors such as ground floor and mezzanine level. It offers users a cost effective solution to comply with Manual Handling Regulations and reduce the risk of injury to employees. he Manual Handling Solutions Mezz Lift is available with a range of platform sizes and lift heights to accommodate all kinds of loads including pallets, roll cages, stillages and tote bins.

The entire handling process can be undertaken by a single operative using the Mezz Lift without any manual lifting to promote safety and productivity. Manual Handling Solutions can provide advise on the best bespoke solution for you, for more information on this range of products please contact us or call 01553 811977

 

 

 

 

Design, manufacture and install 1 off mast-type goods lift to be installed between 2 fixed levels inside a building

  • The lift will be constructed using a single mast which must be bolted down to the ground floor braced to the mezzanine floor.
  • The lift platform will measure approximately 1560mm wide by 1560mm deep and will close down over the legs of the masts
  • The clear working platform area will be 1500mm x 1500mm
  • The overall plan size of the lift including enclosure will be approx 2060mm deep x 1960mm wide
  • The platform will feature 1100mm high rails on 4 sides with twin outwards opening gates to the left & right of the mast (Sides A & C). The gates will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.
  • The platform rails will be meshed in to prevent goods from slipping through the open rails.
  • The platform will close to the floor with a 60mm lowered height and have a maximum total raised height of 4200mm
  • The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor. (approx 4150mm)
  • The platform will be supplied with a loading ramp to be permanently fixed to the ground floor measuring 1500mm wide by 600mm long giving a gradient of 10%. Mounted to the left of the mast, (side A).
  • The hydraulic power pack will be mounted to a mast and electrical system will be housed in a separate enclosure mounted box at ground level.
  • Control points will be positioned at both ground and upper floor levels. Both points will feature latching call buttons and emergency stop controls.
  • Power requirement: 415V 3 phase + Neutral via 10amp isolator (Supplied by customer)
  • Motor specification: 0.8Kw 3phase 415V with 3ltr reservoir
  • Maximum lift capacity will be 600Kg

Manufacture and install 1 off External guard system for both upper and lower floors

  • Ground Floor: The lift will be supplied with a 2600mm high enclosure on all side sides, measuring 2060mm deep overall & 1960mm wide. The enclosure will feature a 2500mm high single gate on Side A & will be fitted with an electrical/mechanical interlock to prevent opening when the lift is not parked.
  • First Floor: To prevent access to the lift and guard the open edge of the mezzanine, the floor will be fitted with a 2600mm high guard on all sides of the lift featuring a 2500mm high single gate on side C with electrical/mechanical interlocking into the lift controls.
Installation:
Installation of the lift at ITAB Swallowdale lane Hemel Hempstead HP2 7EA
Section A - Heights
Mezzanine Layout Plan
Code Dimension Notes
Floor Height H 4200 Ground floor to first floor level
Under Ceiling Height E N/A Ground to under ceiling height
Mast Height H1 4645
Platform rail height D 1100 Standard rail height is 1100mm
 
Section B – Foot-print & gates
ITAB Plan Section B
 
Code
Dimension
Notes
PLATFORM
 
Platform Width
(Overall lift width)
B
1560
Maximum 1520mm
Platform Length
C
1560
Maximum 2000mm
Useable Platform Width
B1
1500
This is equal to B minus 80mm
Useable Platform Length
C1
1500
This is equal to C minus 60mm
Overall lift Length
F
1810
This is equal to C plus 240mm
ENCLOSURE
This is equal to C plus 440mm
In wall mounted applications, the enclosure will only be on three sides with o/a length minus 50mm
Enclosure Length
X
2060
 
Enclosure Width
Y
1960
This is equal to B plus 300mm
Enclosure Height (Ground floor)
2600
Standard setup is 50mm shorter than under ceiling height
Enclosure Height (1st Floor
2600
Standard setup is 1100mm
Enclosure (Other details)
Both levels will have a fully surrounding enclosure will to 2600mm In some applications the enclosure may be full height against the side of a mezzanine
 
GATES & GROUND FLOOR RAMP: (YES) relevant boxes
Side
Platform
Gate
Enclosure Gate (ground floor)
Enclosure Gate (1st floor)
Ramp
Single
Twin
Single
Twin
Single
Twin
A
YES
YES
YES
B
C
YES
YES
 
Section C – Mast Support
Support   Details Notes
Wall Mount
 
None

Please give details of the walling materials

Through Mezzanine
 
Through mezzanine applications require details of the mezzanine structure to ascertain whether or not appropriate support is available
Other
 
Mast support braced from mezzanine through appature
Please provide details
 
Section D – Power Supply
Voltage
Notes
240v Single Phase
 
110v Single Phase
 
415v Three Phase
YES
Standard fit
 
Section E – Additions
Lift Colour
RAL 5017
Standard RAL5017 (Blue)
Enclosure colour
RAL 5017
Standard RAL5017 (Blue)
Anti-slip protection
None
None as standard
 

See more examples... 1 | 2 | 3 | 4 | 5 | 6 | 7| 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |

Mezzanine Floor Enquiry Form

Product Downloads

MHS Solutions Range.pdf

Mezzanine Floor Lifter.pdf

 
Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk
 
Mezzanine Goods Floor Lift