Mezzanine Goods Floor Lifter, ECO Plastics Ltd Goods Lift


Mezzanine Goods Floor Lift

 
Installed at ECO Plastics Ltd, Hemswell Business Park, Hemswek, Lincolnshire, DN21 5TU
 
 
Mezzanine Goods Lift installed at
ECO Plastics Ltd, Hemswell Business Park, Hemswell, Lincolnshire, DN21 5TU
APPLICATION Lifting goods - plastic bales up to a mezzanine floor
PIT INSTALLATION NO
CONSTRUCTION High Lift Scissor Table
MODEL / TYPE TLXY3-20/534-2C
CAPACITY 2000KG – evenly distributed load
TRAVEL / STROKE 5340mm
CLOSED HEIGHT 1200mm
TOTAL RAISED HEIGHT 6540mm
PLATFORM SIZE  3000mm long & 1300mm wide, with smooth top plate
OPERATION  2 x 2.3 kW compact electro-motor with hydraulic pump unit and adequately sized oil tank wired to IP55 Standard Power unit is located behind the lift under the mezzanine floor with a 3 metre hose
POWER SUPPLY  415 Volts, 3 phase, 50 Hz
CONTROL VOLTAGE   24 Volts with IP55 insulated electrics
TRAVEL SPEED Approximately 90 seconds to maximum height
CYLINDERS  Normally single acting precision made units complete with pipe break valve to prevent a rapid lowering speed in the unlikely event of a hydraulic hose failure
WEIGHT  Approximately 2200KG’s
STANDARD FINISH Blue (RAL 5017) & Black (RAL 9005) – spray painted
   
 
Specific colour available at extra cost
CONTROLS  Control points will be mounted at both the ground and mezzanine levels attached to the guarding. Both control points will feature latching control buttons; Raise, Lower & E-stop
SAFETY TRIP BAR Aluminium safety frame with built in safety function. If the safety frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again.
MAINTENANCE Standard safety legs are provided to support the scissor lift mechanism in the raised position and must be deployed for all servicing and maintenance work
   
ENCLOSURE 
Includes installation of a four sided, full height enclosure, measuring approximately 3400mm wide, 2100mm deep and 8540mm high.
 
The enclosure will incorporate 3500mm high twin outward opening gates at ground level on one long side.
 
All gates will be interlocked to prevent access when the table is not in position.
 
At the mezzanine floor level, the guard will be open along the entire 3000mm face.
 
This face will be guarded by an 1100mm high solid guard attached to the mezzanine floor supplied and fitted by the customer.
 

The 3 remaining sides will extend 2000mm above the max platform height to prevent goods from falling to the ground floor.
 

See more examples... 1 | 2 | 3 | 4 | 5 | 6 | 7| 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 |

Mezzanine Floor Enquiry Form

Product Downloads

MHS Solutions Range.pdf

Mezzanine Floor Lifter.pdf

 
Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk
 
Mezzanine Goods Floor Lift