Goods Lifts
Goods Lifts Bespoke Materials Handling Equipment and custom designed Lifting Equipment
Goods Lift
Goods Lift is designed to fully integrate with a Mezzanine floor.

Hydraulic Goods Lifts

Hydraulic Goods Lifts

Hydraulic Goods Lifts from Manual Handling Solutions have been designed and manufactured to offer simple, economical and reliable solution to heavy lifting problems for a variety of applications, including warehouses, industries, supermarkets, restaurants, hotels, hospitals, pharmacies, private residences and office buildings.

Project overview;

A twin mast 500kg hydraulic Goods Lift installed Crawley West Sussex Gatwick Airport. At the lower level the lift can be accessed from either side, through car loading and at the upper level single entry only, the finished floor level is 5000mm and the external doors are 2500mm.

Goods Lift has a platform size of 1600mm x 1980mm and this is fitted with a fully enclosed cabin to a height 2400mm and twin platform gates which are fully interlocked with external doors.

At the lower level entrances the lift is accessed by loading ramps 1680mm wide a 1250mm long x 120mm high.

The self-supporting lift structure is manufactured from 100mm x 100mm box section steel with clad infilled panels. Goods lift fitted with 2500mm high double loading gates cladded with Perspex viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed.

The overall height of the upper level structure is 2750mm.

Goods lift fitted with safety shoot bolts which allows for the operator to enter the lift platform safely while the lift is docked at the upper level, the shoot bolts also eliminates any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at both levels fitted as standard.

To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 3Kw control voltage 24 volt IP55.

General Specification

      • Emergency lowering system when power is cut off
      • Pre wired control box included magnetic starter and overload fuse
      • Upper level travel limit switch and overload relief valve
      • Hydraulic cylinders feature emergency velocity fuse if line breaks
      • Control points are fitted to both ground and upper floor levels
      • The hydraulic power pack and electrical system housed separately at ground level
      • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor
      • Installation; Crawley West Sussex (next to Gatwick Airport)

A Goods Lift from Manual Handling Solutions is a cost effective solution to transport bulky or heavy items in your commercial application. Health and Safety obligations dictate that you must provide a safe and injury free work place – a Goods Lift can eliminate the need for your staff in carrying heavy, awkward loads up flights of stairs. Need something tailored to your specification then our custom-made lift services can help contact Manual Handling Solutions to discuss your exact requirements.

If you have any questions about our goods lifts, or would like assistance with finalising your goods lift design, Manual Handling Solutions are available to answer any queries you may have. We’re happy to talk you through our diverse range of bespoke goods lifts and how they can help with the ups and downs of your business. Contact us today to obtain a free custom quote or general advice.

Contact us on Tel 01553 811977  or email us at