Goods Lifts
Goods Lifts Bespoke Materials Handling Equipment and custom designed Lifting Equipment
Goods Lift
Goods Lift is designed to fully integrate with a Mezzanine floor.

Mezzanine Goods Lifts Bishops Stortford Hertfordshire

Mezzanine Goods Lifts Bishops Stortford Hertfordshire

Mezzanine Goods Lift 500kg installed Bishops Stortford Hertfordshire. Goods  lift will be supplied with a full height enclosure on all sides, measuring approximately 1830mm deep, 1910mm wide and 6900mm high overall.

The enclosure will feature single gates at both levels; 2200mm high on the ground floor and 1100mm high on the first floor. All gates will be fitted with an electrical/mechanical interlock to prevent opening when the lift is not parked.

The lift will be constructed using a single mast which must be tied into the mezzanine floor structure, within a shallow pit. Platform will measure approximately 1430mm wide by 1410mm deep and will close down over the legs of the masts.

The clear working platform area will be 1350mm x 1350mm. The overall plan size of the lift including enclosure will be approx 1830mm deep x 1910mm wide.

The platform will feature 1100mm high rails on 4 sides with a single outwards opening gate in front of the mast. The gate will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.

The platform will close to the floor with a 60mm lowered height and have a maximum total raised height of 4300mm. The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor.

The lift will be supplied with a bridging plate to be installed on the mezzanine level. The hydraulic power pack will be mounted to the mast and electrical system will be housed in a separate enclosure mounted box at ground level. Control points will be positioned at both ground and upper floor levels. Both points will feature latching call buttons and emergency stop controls. Power requirement: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer) Motor specification: 0.75Kw 3phase 415V with 4ltr reservoir.

Contact us on Tel 01553 811977  or email us at