Goods Lifts
Goods Lifts Bespoke Materials Handling Equipment and custom designed Lifting Equipment
Goods Lift
Goods Lift is designed to fully integrate with a Mezzanine floor.

Mezzanine Goods Lifts Poole Dorset

Mezzanine Goods Lifts Poole Dorset

Mezzanine Goods Lift installed Poole Dorset The lift will be constructed using a single mast which must be bolted down to the ground floor braced to the mezzanine floor. The lift platform will measure approximately 1350mm wide by 1250mm deep and will close down over the legs of the masts.

The clear working platform area will be 1290mm x 1130mm. The overall plan size of the lift including enclosure will be approx 1750mm deep x 1750mm wide. Platform will feature 1100mm high rails on 4 sides with twin outwards opening gates to the left & right of the mast. 

Platform gates will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open. The platform will close to the floor with a 60mm lowered height and have a maximum total raised height of 2500mm. The maximum lift height will be governed by a limit switch system to ensure that the platform parks with the mezzanine upper floor. (approx 2443mm).

The platform will be supplied with a loading ramp to be permanently fixed to the ground floor measuring 1250mm wide by 600mm long giving a gradient of 10%. Mounted to the left of the mast.

The hydraulic power pack will be mounted to a mast and electrical system will be housed in a separate enclosure mounted box at ground level. Control points will be positioned at both ground and upper floor levels.

Both points will feature latching call buttons and emergency stop controls. Power requirement: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer) Motor specification: 0.8Kw 3phase 415V with 4ltr reservoir Maximum lift capacity will be 500Kg.

External guard system for both upper and lower floors; Ground Floor: The lift will be supplied with a 2200mm high enclosure on all sides, measuring 1750mm deep overall & 1750mm wide.

The enclosure will feature a 2100mm high single gate and fitted with an electrical/mechanical interlock to prevent opening when the lift is not parked. First Floor: To prevent access to the lift and guard the open edge of the mezzanine, the floor will be fitted with a 1100mm high guard on all sides of the lift featuring a 1100mm high single gate with electrical/mechanical interlocking into the lift controls

Contact us on Tel 01553 811977  or email us at sales@manualhandlingsolutions.co.uk