Goods Lifts
Goods Lifts Bespoke Materials Handling Equipment and custom designed Lifting Equipment
Goods Lift
Goods Lift is designed to fully integrate with a Mezzanine floor.

Mezzanine Goods Lifts Portsmouth Hampshire

Mezzanine Goods Lifts Portsmouth Hampshire

Mezzanine Goods Lift 3 tier installed Portsmouth Hampshire with maximum working load 200kg, fully enclosed in a self-supporting mesh shaft. The platform will be 1200mm x 1550mm to suit a single trolley or a pallet and will be guarded 2000mm high to suit the loading direction.

Travel 1st floor – 2965mm, 2nd floor – 5960mm. At the entrance to the lift at each level there will be 2300mm clear height gates which will be fitted with electrical interlocks to prevent the gates from being opened unless the platform is docked at the appropriate level. At the lower level there will be a small fixed ramp to assist loading on to the 50mm deep platform.

Power supply 20-amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a push to run control station adjacent to the gates at each level.

  • Training Operator training carried out on completion
  • CE Mark with Declaration of Conformity
  • Operation and Maintenance Manual issue on completion
  • LOLER Report and Test issued on commission

Contact us on Tel 01553 811977  or email us at sales@manualhandlingsolutions.co.uk